TR-808 modification prices for customers outside Australia
2021-03-15 Robin Whittle
rw@firstpr.com.au
This page lists prices for customers outside Australia, in Australian
dollars for payment via
PayPal. If you are paying via
TransferWise, or bank transfer, the prices will be 0.97 of the PayPal prices shown below.
The best way of estimating the cost in your currency is to commence a
PayPal "Send Money" payment for the desired Australian dollar amount,
to rw@firstpr.com.au . After the PayPal system reports the total
cost in your currency you can cancel the payment rather then confirm
it.
After your machine arrives I will discuss the modifications you want
via email or phone. I will confirm the work to be done with the
total cost.
To the TR-808 page:
../ .
To the
../prices-au/ page for Australian
customers.
The following lines can be copied into an email, deleting those which
do not apply. The items below
do not include freight costs. Please see
../../freight-insurance . TR-808s are too valuable to be sent by Australia Post.
$309 Cleanup and basic repairs, including pot
cleaning and write-spike mods.
$309 New backup battery arrangements with larger
capacitor, internal battery holder for
cylindrical lithium battery with the battery
installed and a switch with two LEDs to
separately indicate the charge of the three
AA alkaline and the lithium battery.
See ../#membak for full details.
$258 Install Omron sealed tact switches.
$309 Install new 220-240V power transformer and
mains lead.
($93 If I am only doing some or all of the
items listed above, there will usually be
an extra charge of about AUD$93 for the
customs fee we usually pay to get the
TR-808 into Australia if the insured value
plus shipping totals AUD$1000 or more.)
$618 4 Level Accent system.
$618 Sound Modifications with 3 Audio Inputs.
or $772 Sound Modifications with 3 Audio Inputs
and 3.5mm socket for audio/CV signals to
turn on Accent. ../#accentin .
$618 32 Banks of Memory.
or $824 32 Banks of Memory with Dynamic Bank
Switching: two 3.5mm audio/CV input
sockets with two LEDs to invert two of the
memory bank address bits.
or $1030 32 Banks of Memory with Dynamic Bank
Switching: four 3.5mm audio/CV input
sockets with four LEDs to invert four of
the memory bank address bits.
(These two DBS options are described at
../#dbs and are listed as TR-808-1 on page
3 of the 32 Bank Memory with DBS manual
which has a full explanation.)
MIDI In and Out, MIDI In or MIDI In for Sync only. Descriptions at ../#midi :
$927 Kenton MIDI In and Out system kit (link)
installed, with In, Thru and Out sockets
and a higher quality C&K push-button switch
mounted below the rear panel with a protective
surround.
or $xxx Real World Interfaces MIDI In system with
MIDI In via the Sync Socket and a 3.5mm
socket for the Auxiliary Trigger output.
This was planned, but it seems unlikely
that I will develop it.
For which there is an optional:
$165 Sync Lead (link) which enables up to three
slave devices to be driven with the DIN/
Roland Sync which the MIDI In system
generates when receiving MIDI Sync.
or $360 Real World Interfaces MIDI In for Sync only
system with MIDI In via the Sync Socket.
This can use the optional Sync Lead too.
.